Welcome to Rubtech India

Lathe CutWashers/Rings (solid rubber)

Outside Diameter

Wall Thickness

Wall (inches) Above Included		Tolerance* (inches)
.030	.200	± .008
.200	.300	± .012
.300	& over	± .015
* Measured on fixed mandrel

Wall (inches) Above Included		Tolerance* (inches)
.030	.200	± .007
.200	.300	± .010
.300	.500	± .015

Inside Diameter

Cut Thickness

Inside Diameter (inches) Above Included		Tolerance** (inches)
.200	.700	± .007
.700	1.500	± .010
1.500	2.600	± .010
2.600	5.000	± .025
5.000	7.500	± .035
7.500	9.000	± .060
9.000	12.000	± .075
**Note: Tolerances for post cured lathe cut parts from silicone, polyacrylates and some other materials ususally require greater tolerances on the inside diameter. Consult RubtechIndia for tolerances requirements.

Cut (inches) Above Included		Tolerance (inches)
.015	.200	± .005
.200	.400	± .010
.400	.500	± .015
.500	.600	± .020
.600	.700	± .025
.700	1.000	± .030

Disclaimer:
The technical data in the RubtechIndia website (www.rubtechindia.com) are to be used as a guide only. RubtechIndia does not guarantee the accuracy of the information and is not responsible for its end use.